scx10.2 | Northwest Scaler Designs

NWSD BULLY LEAF/LINK HYBRID CHASSIS

Corey Mccabe — Wed, 04 Dec 2024 19:38:51 +0000

The NEW NWSD BULLY chassis was as a long wheel version (11.8″ to 13.5″) of the NWSD Bratt chassis. These are designed as a Great starting point for any Link/Leaf hybrid build. I started with the front half of our tested and proven Scattergun C1 Modified forward skid chassis and added a rear section that allows either a leaf or Link rear suspension to add many options for builders! This allows the benefit of our Forward motor mounts, skids and other parts to interchange.
The top of the rear section of the chassis is flat to allow for easy mounting of truck beds and has added mounting Holes for shock positions.
This Chassis Uses the same links as our Scattergun C1 and C2 modified chassis that are available through Hardcore RC- https://hardcore-rc.ecwid.com/Scattergun-C1-C2-Modified-p529155070

Here is what’s included-

-NWSD Bratt Chassis laser cut from 6061 aluminum

-panhard mount

-Vertical RC Dual servo mount

-NWSD prints skid and rear brace

-NWSD stainless leaf mounts hangers, springs and stainless shackles

-Stainless hardware
body mounts sold separately

NWSD SCATTERGUN C1 CHASSIS SYSTEM WITHOUT FMM

Corey Mccabe — Sun, 27 Nov 2022 04:05:13 +0000

NWSD SCATTERGUN C1 COMPLETE SYSTEM WITHOUT FMM

THIS IS THE NEXT EVOLUTION OF WHAT WAS OUR C1 V3 CHASSIS. I DID A MAJOR OVERHAUL ON THE C1 V3 TO IMPROVE THE FOLLOWING AREAS-

I STARTED BY MINIMIZING THE SKID AREA TO MINIMIZE BREAK OVER THEN I RAISED THE LOWER RAIL HEIGHT TO IMPROVE CLEARANCE FOR PORTAL AXLES. THE NEXT STEP WAS TO REDESIGN THE PANHARD MOUNT TO ALLOW FOR MULTIPLE MOUNTING POSITIONS. THIS ALLOWS FOR EASIER SETUP ACROSS MULTIPLE VARIETIRES OF AXLE TYPES. THE FORWARD MOTOR MOUNT POSITION WAS REFINED TO LOWER ITS LCG AS MUCH AS POSSIBLE. WE WILL BE OFFERING A FMM FOR BOTH CENTERED AND OFFSET FRONT DIFFS TO OPTIMIZE THE DRIEVLINE CLEARANCE! LAST BUT NOT LEAST I COMPLETELY REDESIGNED THE SHOCK HOOPS TO ALLOW FOR BETTER SHOCK POSITIONS THAT ARE OPTIMIZED FOR WHEELBASES BETWEEN 11.3 AND 12.3.

FEATURES

-NWSD SCATTERGUN C1 CHASSIS

-NWSD PANHARD MOUNT- THESE ARE NOW SETUP TO ADJUST TO MULTIPLE POSITIONS FOR EASIER SETUPS!

-LASER CUT FROM 6061 ALUMINUM

-PROUDLY MADE IN AMERICA

-VERTICAL RC DUAL SERVO MOUNT

-NWSD SKID WITH DUAL AXIAL RTR TRANSMISSION PATTERN

-NWSD REAR CHASSIS BRACE

-STAINLESS HARDWARE

-THESE SHIP ASSEMBLED!!

!!LINKS, AXLES, BODY MOUNTS, SHOCKS ETC NOT INCLUDED!!!

NWSD BRATT LEAF/LINK HYBRID CHASSIS

Corwin McCabe — Tue, 15 Sep 2020 02:56:03 +0000

The NEW NWSD Bratt chassis was designed as a starting point for the Tamiya Brat body builds but it is also a Great starting point for any Link/Leaf hybrid build. I started with the front half of our tested and proven Scattergun C1 Modified forward skid chassis and added a rear section that allows either a leaf or Link rear suspension to add many options for builders! This allows the benefit of our Forward motor mounts, skids and other parts to interchange.
The top of the rear section of the chassis is flat to allow for easy mounting of truck beds and has added mounting Holes for shock positions.
This Chassis Uses the same links as our Scattergun C1 and C2 modified chassis that are available through Hardcore RC- https://hardcore-rc.ecwid.com/Scattergun-C1-C2-Modified-p529155070

Here is what’s included-

-NWSD Bratt Chassis laser cut from 6061 aluminum

-panhard mount

-Vertical RC Dual servo mount

-NWSD prints skid and rear brace

-NWSD STAINLESS LEAF MOUNTS AND SHACKLES

-Springs

-Stainless hardware

– BRATT body mounts not included but contact us to order a set.