Axial Complete Sets | Northwest Scaler Designs

NWSD BBV5 TWISTED EDITION! LIMITED SERIES CHASSIS BUILDS #43-52

Corey Mccabe — Sun, 11 May 2025 14:43:19 +0000

Introducing a joint release from NWSD/TwistedFabCo
The Bouncing Betty V5 “Twisted Edition”!!

$415 plus shipping.
!!!around 3 week lead time!!!

It’s no secret that the Bouncing Betty V5 really shines when combined with the incredible long leafs kits from TwistedFabCo!
It’s the #1 upgrade I’m asked about when discussing the V5 with builders. It’s also the first upgrade I recommend to builders.

Add some Priceys Custom Crawlers shocks, Merchant Metal Fab LLC leaf mounts and a AWB from Kenny’s Custom Crap and you have a line killing leafer!!

Unfortunately it is not practical to offer TFC springs on every BBV5 chassis due to time constraints…. But what if we could offer a few a month?

We have teamed up to release small batches of what we’re calling the “Twisted edition” or BBV5TE with all the best options to
Maximize performance!!

Here is what’s included-

-NWSD Bouncing Betty V5 steel chassis cerakoted in graphite black. All these will be numbered!
-Twisted Fabco stage 3 long leaf spring kit
-NWSD stainless dual servo mount
-NWSD aluminum rear brace ( see screen shot. These are due in)
-NWSD skid with transmission pattern of your choice
-NWSD aluminum Tall front hoops
-NWSD aluminum low pro rear hoops
-NWSD stainless hangers And shackles
-Stainless hardware

SERVO MOUNT AND BODY MOUNTS FOR BBV5 LWB & SWB POWER WAGON BODIES

Corey Mccabe — Sun, 16 Feb 2025 21:05:40 +0000

SERVO MOUNT AND BODY MOUNTS FOR BBV5 LWB & SWB BODIES.
THIS INCLUDES THE SPECIAL SERVO MOUNT, BODY MOUNTS AND VELCRO.

NWSD BANNER 36″X36″

Corey Mccabe — Thu, 16 Jan 2025 21:43:48 +0000

WE ARE NOW OFFERING 36″X 36″ BANNERS!!
MADE FROM RUGGED VINYL WITH GROMMETED CORNERS

NWSD BULLY LEAF/LINK HYBRID CHASSIS

Corey Mccabe — Wed, 04 Dec 2024 19:38:51 +0000

The NEW NWSD BULLY chassis was as a long wheel version (11.8″ to 13.5″) of the NWSD Bratt chassis. These are designed as a Great starting point for any Link/Leaf hybrid build. I started with the front half of our tested and proven Scattergun C1 Modified forward skid chassis and added a rear section that allows either a leaf or Link rear suspension to add many options for builders! This allows the benefit of our Forward motor mounts, skids and other parts to interchange.
The top of the rear section of the chassis is flat to allow for easy mounting of truck beds and has added mounting Holes for shock positions.
This Chassis Uses the same links as our Scattergun C1 and C2 modified chassis that are available through Hardcore RC- https://hardcore-rc.ecwid.com/Scattergun-C1-C2-Modified-p529155070

Here is what’s included-

-NWSD Bratt Chassis laser cut from 6061 aluminum

-panhard mount

-Vertical RC Dual servo mount

-NWSD prints skid and rear brace

-NWSD stainless leaf mounts hangers, springs and stainless shackles

-Stainless hardware
body mounts sold separately

NWSD WINNEABAGO WARRIOR CONVERSION KIT FOR TONKA – NOW WITH STAINLESS SERVO MOUNT!

Corey Mccabe — Mon, 30 Sep 2024 23:09:34 +0000

NWSD Winnebago Warrior kit -Everything you need to convert your vinatge Tonka Winneabego to a leaf spring rc chassis

Includes-

-Laser cut stainless steel chassis-(all are numbered)

-stainless steel battery tray/electronics tray

-stainless hardware (all necessary fasteners included)

-STAINLESS STEEL DUAL SERVO MOUNT

-skid with axial 3 gear pattern

-body mounts that bolt directly to the factory Tonka Rivet holes

-leaf spring hangers and leaf springs

*you will need leaf adapters to work with your choice of axles-I recommend AR44 3 piece style axles for simplicity

$290.00 plus shipping
lead time from order date time to shipping date is usually around 1 week
!!!BODY, AXLES, AXLE LEAF ADAPTERS, SHOCKS, ELECTRONICS NOT INCLUDED!!

Low pro rear shock hoops for Bouncing Betty V5 long and short wheel base chassis sets

Corey Mccabe — Mon, 08 Jul 2024 20:34:03 +0000

we are now offering Low pro rear shock hoops for Bouncing Betty V5 long and short wheel base chassis! Need a bit more clearance? These are the designed to add more versatility. they are also slotted to have a bit of vertical adjustment
includes the shock hoops only. you can reuse your stock hardware

FMM for Scattergun C1/C2 modified chassis- for offset front differentials

Corey Mccabe — Fri, 18 Aug 2023 23:07:04 +0000

FMM for Scattergun C1/C2 modified chassis- for offset front differentials
these are designed for a center differential front axle.
stubby motors are ideal

inlcudes-
fmm plate
shaft
bearings
fasteners

FMM for Scattergun C1/C2 modified chassis- for centered front differentials

Corey Mccabe — Fri, 18 Aug 2023 23:05:47 +0000

FMM for Scattergun C1/C2 modified chassis- for centered front differentials
these are designed for a center differential front axle.
540 full size or stubby motors are ideal

inlcudes-
fmm plate
shaft
bearings
fasteners

!!!NEW SCATTERGUN MODIFIED C1 CHASSIS!!!

Corey Mccabe — Fri, 18 Aug 2023 22:52:26 +0000

Introducing the new NWSD Scattergun C1 Modified chassis systems for SCX!!

After designing the Scattergun C1 I was asked by the NWSD team drivers to produce a forward skid style chassis. I went work experimenting with different setups.

I decided ultimately to take the proven Scattergun C1 and make this the basis for the new platform.

I started by moving the skid toward 1.5” (38mm) on the chassis establishing a forward bias for weight and excellent break over.
Both the Scattergun modified C1 and C2 chassis utilize the same offset links that are readily available from HardCore Rc!

https://hardcore-rc.ecwid.com/Scattergun-C1-C2-Modified-p529155070

They also share the same servo mounts, skids, braces and Forward motor mounts for build simplicity!

C1 modified has a flat skid

The Scattergun C1 modified chassis require 80mm or similar shocks.

Speaking of forward motor mounts-

The C1 Modified chassis have a choice of FMM’s optimized for center diff front axles or offset diff axles.

The center diff FMM can even fit a full-size 540 motor!

includes-
-Chassis laser cut from 6061 with panhard mount
-Vertical Rc dual servo mount
-skid with axial 3 gear mirrored pattern
-rear brace

FORWARD MOTOR MOUNT NOT INLCUDED

optional parts-
Forward motor mount for Offset front diff $85
forward motor mount for center front diff $85
TGH creeper T case $99.99

!!!NEW SCATTERGUN MODIFIED C2 CHASSIS!!!

Corey Mccabe — Fri, 18 Aug 2023 22:39:52 +0000

Introducing the new NWSD Scattergun C2 Modified chassis systems for SCX!!