Axial Chassis | Northwest Scaler Designs

NWSD Sand Scorcher Rack

Corey Mccabe — Thu, 30 Jan 2025 19:57:41 +0000

NWSD racks for all Tamiya Sand Scorcher bodies!
These are laser cut from Aluminum and arrived assembled!
you will need to drill 4 2mm hole in the roof to mount this.
up to 2 week lead time on these

NWSD BANNER 36″X36″

Corey Mccabe — Thu, 16 Jan 2025 21:43:48 +0000

WE ARE NOW OFFERING 36″X 36″ BANNERS!!
MADE FROM RUGGED VINYL WITH GROMMETED CORNERS

NWSD BULLY LEAF/LINK HYBRID CHASSIS

Corey Mccabe — Wed, 04 Dec 2024 19:38:51 +0000

The NEW NWSD BULLY chassis was as a long wheel version (11.8″ to 13.5″) of the NWSD Bratt chassis. These are designed as a Great starting point for any Link/Leaf hybrid build. I started with the front half of our tested and proven Scattergun C1 Modified forward skid chassis and added a rear section that allows either a leaf or Link rear suspension to add many options for builders! This allows the benefit of our Forward motor mounts, skids and other parts to interchange.
The top of the rear section of the chassis is flat to allow for easy mounting of truck beds and has added mounting Holes for shock positions.
This Chassis Uses the same links as our Scattergun C1 and C2 modified chassis that are available through Hardcore RC- https://hardcore-rc.ecwid.com/Scattergun-C1-C2-Modified-p529155070

Here is what’s included-

-NWSD Bratt Chassis laser cut from 6061 aluminum

-panhard mount

-Vertical RC Dual servo mount

-NWSD prints skid and rear brace

-NWSD stainless leaf mounts hangers, springs and stainless shackles

-Stainless hardware
body mounts sold separately

NWSD OVER/UNDER FORWARD MOTOR MOUNT FOR DERRINGER V4 CHASSIS (Copy)

Corey Mccabe — Fri, 16 Dec 2022 20:55:07 +0000

NWSD OVER/UNDER FORWARD MOTOR MOUNT FOR DERRINGER V4 CHASSIS

includes-

-FMM motor plate/mount

-bearing retainers

-Shaft/spur assembly.

-all fasteners included

-all parts assembled and ready to install

!!!!!DOES NOT INCLUDED MOTOR, DRIVE SHAFT ETC.!!!

NWSD SCATTERGUN C1 CHASSIS SYSTEM WITHOUT FMM

Corey Mccabe — Sun, 27 Nov 2022 04:05:13 +0000

NWSD SCATTERGUN C1 COMPLETE SYSTEM WITHOUT FMM

THIS IS THE NEXT EVOLUTION OF WHAT WAS OUR C1 V3 CHASSIS. I DID A MAJOR OVERHAUL ON THE C1 V3 TO IMPROVE THE FOLLOWING AREAS-

I STARTED BY MINIMIZING THE SKID AREA TO MINIMIZE BREAK OVER THEN I RAISED THE LOWER RAIL HEIGHT TO IMPROVE CLEARANCE FOR PORTAL AXLES. THE NEXT STEP WAS TO REDESIGN THE PANHARD MOUNT TO ALLOW FOR MULTIPLE MOUNTING POSITIONS. THIS ALLOWS FOR EASIER SETUP ACROSS MULTIPLE VARIETIRES OF AXLE TYPES. THE FORWARD MOTOR MOUNT POSITION WAS REFINED TO LOWER ITS LCG AS MUCH AS POSSIBLE. WE WILL BE OFFERING A FMM FOR BOTH CENTERED AND OFFSET FRONT DIFFS TO OPTIMIZE THE DRIEVLINE CLEARANCE! LAST BUT NOT LEAST I COMPLETELY REDESIGNED THE SHOCK HOOPS TO ALLOW FOR BETTER SHOCK POSITIONS THAT ARE OPTIMIZED FOR WHEELBASES BETWEEN 11.3 AND 12.3.

FEATURES

-NWSD SCATTERGUN C1 CHASSIS

-NWSD PANHARD MOUNT- THESE ARE NOW SETUP TO ADJUST TO MULTIPLE POSITIONS FOR EASIER SETUPS!

-LASER CUT FROM 6061 ALUMINUM

-PROUDLY MADE IN AMERICA

-VERTICAL RC DUAL SERVO MOUNT

-NWSD SKID WITH DUAL AXIAL RTR TRANSMISSION PATTERN

-NWSD REAR CHASSIS BRACE

-STAINLESS HARDWARE

-THESE SHIP ASSEMBLED!!

!!LINKS, AXLES, BODY MOUNTS, SHOCKS ETC NOT INCLUDED!!!

NWSD SCATTERGUN C1 CHASSIS SYSTEM WITH FMM FOR CENTER DROP AXLES

Corey Mccabe — Fri, 25 Nov 2022 05:11:49 +0000

NWSD SCATTERGUN C1 COMPLETE SYSTEM!

THIS IS THE NEXT EVOLUTION OF WHAT WAS OUR C1 V3 CHASSIS. I DID A MAJOR OVERHAUL ON THE C1 V3 TO IMPROVE THE FOLLOWING AREAS-

FEATURES

-NWSD SCATTERGUN C1 CHASSIS

-NWSD PANHARD MOUNT- THESE ARE NOW SETUP TO ADJUST TO MULTIPLE POSITIONS FOR EASIER SETUPS!

-LASER CUT FROM 6061 ALUMINUM

-PROUDLY MADE IN AMERICA

-VERTICAL RC DUAL SERVO MOUNT

-NWSD SKID WITH DUAL AXIAL RTR TRANSMISSION PATTERN

-NWSD REAR CHASSIS BRACE

-STAINLESS HARDWARE

– NWSD OVER/UNDER FORWARD MOTOR MOUNT

-THESE SHIP ASSEMBLED!!

!!LINKS, AXLES, BODY MOUNTS, SHOCKS ETC NOT INCLUDED!!!

NWSD ROOF RACK WITH PIVOT

Corey Mccabe — Fri, 14 Oct 2022 20:35:01 +0000

NWSD ROOF RACK WITH PIVOT POINT

FEATURES-

LASER CUT FROM 11 GA ALUMINUM
118MM X 61MM
INLCUDES MOUNTING HARDWARS AND ROOF SPACERS
INCLUDES PIVOT
weighs .09 oz

NWSD VULTURE C3 CHASSIS

Corey Mccabe — Fri, 14 Oct 2022 18:53:50 +0000

Introducing the new Vulture C3 chassis from NWSD!!

The Vulture is a Class 3 chassis that was inspired by the NWSD team driver only C3PO chassis! I took the feed back from our team drivers and designed the Vulture to pick the competitions bones clean!!

Here are the specs-

Laser cut from 11ga 6061 aluminum
8 degree skid rake
Popular axial skid mount pattern that will work with any scx style aftermarket skid
Includes skid with axial 3 gear mirrored bolt pattern
Includes rear frame brace
Optional NWSD Over/Under FMM not included

NWSD OVER/UNDER FORWARD MOTOR MOUNT FOR DERRINGER V3.5 CHASSIS

Corey Mccabe — Thu, 06 Oct 2022 16:51:13 +0000

NWSD OVER/UNDER FORWARD MOTOR MOUNT FOR DERRINGER V3.5 CHASSIS

!!!!!This will only work with the newest version that includes the slot in the front shock hoops!!!! see pic for example.